IMPROVEMENT OF THE TECHNOLOGY OF CASTING SHAFT COMPONENTS FROM 35XGCL BRAND STEEL IN AN ELECTRIC ARC FURNACE

Authors

  • Nosir Saidmakhamadov, Nodir Turakhodjaev Tashkent State Technical University, Tashkent, Uzbekistan, Uzbek – Japanese Innovation Center of Youth, Tashkent, Uzbekistan
  • Orzumurod Ermanov, Akmal Ibragimov, JSC Uzbek Metallurgical Plant, Bekabad, Uzbekistan
  • Kamol Abdullaev Namangan engineering – construction institute, Uzbekistan
  • Rustam Abdullaev Namangan City Department of Economic Development and Poverty Reduction, Uzbekistan

Keywords:

chrome, manganese, alloyed, shaft, sand – clay mold, hardness, viscosity, gas pores, nonmetallic inclusions, fluxes.

Abstract

In this article, 35XGCL steel alloy was liquidized. The resulting liquid metal is cleaned of non – metallic inclusions and gas pores by aluminum alloying, and casting technology was developed based on energy and resource efficient innovative technologies. In order to obtain a high – quality cast product, the composition of sand – clay and liquid glass mold mixtures was developed, and a high – quality cast product was liquefied. In addition, thermal treatment regimes were developed to increase the mechanical properties of the cast alloy, and as a result, a high – quality and resource – efficient cast product was obtained.

Downloads

Published

2023-04-08

Issue

Vol. 15 (2023)

Section

Articles

How to Cite

IMPROVEMENT OF THE TECHNOLOGY OF CASTING SHAFT COMPONENTS FROM 35XGCL BRAND STEEL IN AN ELECTRIC ARC FURNACE. (2023). American Journal of Interdisciplinary Research and Development, 15, 59-66. https://ajird.journalspark.org/index.php/ajird/article/view/597