DEVELOPMENT OF QUALITY STEEL ALLOY LIQUIDATION TECHNOLOGY

Authors

  • Saidmakhamadov Nosir PhD Candidate, Tashkent State Technical University, University Street 2, Tashkent, Uzbekistan
  • Turakhodjaev Nodir DSc professor, Tashkent State Technical University, University Street 2, Tashkent, Uzbekistan
  • Abdullaev Kamol Docent, Namangan Engineering – Construction Institute, Islam Karimov Street 12, Namangan
  • Kholmirzaev Nozimjon PhD student, Tashkent state technical university, University Street 2, Tashkent, Uzbekistan
  • Tadjiev Nuritdin Researcher, Tashkent State Technical University, University Street 2, Tashkent, Uzbekistan

Keywords:

chrome, manganese, alloyed, shaft, sand – clay mold

Abstract

In this article, the mode of liquefaction of 35XGCL steel alloy was used. The obtained liquid metal is cleaned from non – metallic inclusions and gas pores by non – furnace processing, and casting technology was developed on the basis of energy and resource efficient innovative technologies. The composition of the sand – clay mold was worked out to obtain a high – quality cast product, and a high – quality cast product was obtained by liquefaction. Also, thermal treatment regimes were developed to increase the mechanical properties of the cast alloy, and as a result, a high – quality and resource – efficient cast product was obtained.

Downloads

Published

2022-08-22

Issue

Vol. 7 (2022)

Section

Articles

How to Cite

DEVELOPMENT OF QUALITY STEEL ALLOY LIQUIDATION TECHNOLOGY. (2022). American Journal of Interdisciplinary Research and Development, 7, 74-83. https://ajird.journalspark.org/index.php/ajird/article/view/207